|
VR-HOD
Apr 9, 2011 0:23:20 GMT
Post by bluestar on Apr 9, 2011 0:23:20 GMT
Mark,
I noticed that you still have the CX version of VR-HOD as a -100 when it should be a -1. The KA version of VR-HOD is correct in the -1 group.
bs
|
|
|
VR-HOD
Apr 9, 2011 2:08:23 GMT
Post by aerofoto - HJG Admin on Apr 9, 2011 2:08:23 GMT
It might have slipped my attention .... given other stuff I've really had to focus more intently upon
I do recall previous communication regarding this .... to the extent that "IF" the current designation is indeed erroneous .... then that's likely because our reference sounce (usually AIRLINERS.NET .... which I know is not perfect .... in the absence of actual production data) had that aircraft incorrectly designated to start with.
To be honest with you .... I just haven't had time to check !
Mark C AKL/NZ
|
|
|
VR-HOD
Apr 9, 2011 3:49:08 GMT
Post by bluestar on Apr 9, 2011 3:49:08 GMT
No problemo mi amigo. Just glad I wasn't drive'n the G650 out at KROW. bs
|
|
|
VR-HOD
Apr 9, 2011 20:51:26 GMT
Post by aerofoto - HJG Admin on Apr 9, 2011 20:51:26 GMT
Muy bueno Espanol "BLUE STAR" / Very good Spanish "BLUE STAR" I try'n sort out that CX L1011 over the next couple of days. Dan .... please sit tight until I can get back to you regarding this. Thanks ! Mark C AKL/NZ
|
|
|
VR-HOD
Apr 9, 2011 21:55:12 GMT
Post by Dan K. Hansen on Apr 9, 2011 21:55:12 GMT
I'm as tight as can be ...
|
|
|
VR-HOD
Apr 10, 2011 12:35:23 GMT
Post by Dan K. Hansen on Apr 10, 2011 12:35:23 GMT
Fixed
|
|
|
VR-HOD
Apr 10, 2011 19:31:28 GMT
Post by aerofoto - HJG Admin on Apr 10, 2011 19:31:28 GMT
"THANK YOU" Dan Just clarifying things here for you folks .... The originally released CATHAY PACIFIC AIRWAYS L1011 TRISTAR 100 (VR-HOD) .... is now an L1011 TRISTAR 1 aircraft .... and is now located in the "L1011 TRISTAR 1" downloads section. Please refer to my "L1011 TRISTAR PANEL INSTALLATION & HANDING NOTES" posting (on this forum page) for information regarding the correct matching panel for the L1011 TRISTAR 1 aircraft base pack .... in order to see the right performance. Thanks for your HU regarding this too "BLUE STAR" ! Mark C AKL/NZ
|
|
|
VR-HOD
Sept 5, 2016 14:21:02 GMT
Post by tokolosh on Sept 5, 2016 14:21:02 GMT
I was installing VR-HOD today and it will only work with the L1011-100 model. It is listed correctly as a L-1011-1 though. For absolute certainty I downloaded and installed the latest files.
Greetings, Albert.
|
|
|
VR-HOD
Sept 5, 2016 14:42:38 GMT
Post by aerofoto - HJG Admin on Sept 5, 2016 14:42:38 GMT
When you say "it wouldn´t work" .... what are you actually referring to Albert ? Are you meaning it wouldn´t appear/display within FS .... or .... ar you refering to some other abnormality ? Let me know and I´ll have a look at it for you later on .... and see what I can deduce For starters though .... can you copy & paste ("HERE") the FLTSIM.XX section of your CFG ,,,, for this particular texture only .... and as it curently appears within your own installation so I can analyse that too Mark C BOG/CO
|
|
|
VR-HOD
Sept 5, 2016 15:29:12 GMT
Post by tokolosh on Sept 5, 2016 15:29:12 GMT
Hi Mark, I should have been a little clearer. Apologies. The sim line in the installation text reads sim=L1011_100 and should be sim=L1011-1. It works perfectly, so it's only a very minor correction needed for the text file. Thanks for your time.
|
|
|
VR-HOD
Sept 5, 2016 15:38:12 GMT
Post by aerofoto - HJG Admin on Sept 5, 2016 15:38:12 GMT
Think I found the issue for you Albert. When this CATHAY L-1011 texture was first relased it appeared among our L-1011-100 section texture downloads. "BLUE STATE" correctly recommended it should be listed as an L-1011-1 .... and which was done accordingly. HOWEVER .... in moving this texture file from -100 section to the L1011-1 section the basic aircraft type entries for its FLTSIM.XX/ADD TO AIRCRAFT data were all edited/corrected .... but .... someone forgot to update its SIM= data line That´s likely why this texture won´t display with the L-1011-1 Aircraft Base pack All you need to do to resolve this though is open your CFG for this particular aircraft base pack .... locate your CATHAY texture entry .... identify its SIM= data line and change this data line to read pecisely as follows .... sim=L1011_1.... then save this edit .... and that should resolve your problem .... at least I think that´s what your problem may be Make sure you use this CATHAY texture with the "L-1011-1" Aircraft Base Pack version though .... and also use it with either of the following version L-1011 panel versions (only) .... L-1011 RR-RB211-22B Panel Standard version
L-1011 RR-RB211-22B Panel Tape version .... along with our RR RB211 turbofan soundpack for all of the L-1011´s Mark C BOG/CO
|
|
|
VR-HOD
Sept 5, 2016 15:42:11 GMT
Post by aerofoto - HJG Admin on Sept 5, 2016 15:42:11 GMT
Looks like we were both replying at the same time Albert Anyone else enountering this particular issue with this same texture should (meanwhile) edit their ADD TO AIRCRAFT data for it as is bold typed (in red) below .... // FS2004 ///////////////////////////////////////////////// [fltsim.xx] // Change "xx" to next number in sequence starting from 0 title=Lockheed L-1011-1 Cathay Pacific Airways 1980 sim=L1011_1model= panel= sound= texture=cathay_pacific_1980_385-1_vr-hod kb_checklists= kb_reference= atc_id=VR-HOD atc_id_color=0x000091ff atc_id_enable=1 atc_airline=CATHAY atc_flight_number=1011 atc_heavy=1 atc_parking_codes=CPA atc_parking_types=GATE,RAMP,CARGO ui_manufacturer=Lockheed ui_type=L1011-1 ui_variation=Cathay Pacific Airways (1980) visual_damage=0 description=L1011 TRISTAR\nFirst flight on November 16th 1969 at Palmdale California\nTotal production of 250 aircraft\nModel by Erick Cantu\nFDE by Fraser Turner and modified Mike MONCE HJG\nPanel by Ken Mitchell and modified by George CARTY HJG\nTexture by Tony MADGE HJG with engine textures by Todd MANBECK // FSX //////////////////////////////////////////////////// [fltsim.xx] // Change "xx" to next number in sequence starting from 0 title=Lockheed L-1011-1 Cathay Pacific Airways 1980 sim=L1011_1model= panel= sound= texture=cathay_pacific_1980_385-1_vr-hod kb_checklists= kb_reference= atc_id=VR-HOD atc_id_color=0x000091ff atc_id_enable=1 atc_airline=CATHAY atc_flight_number=1011 atc_heavy=1 atc_parking_codes=CPA atc_parking_types=GATE,RAMP,CARGO ui_manufacturer=Lockheed ui_type=L1011-1 ui_variation=Cathay Pacific Airways (1980) ui_typerole=Commercial Airliner ui_createdby=Vistaliners - Erick CANTU visual_damage=0 description=L1011 TRISTAR\nFirst flight on November 16th 1969 at Palmdale California\nTotal production of 250 aircraft\nModel by Erick Cantu\nFDE by Fraser Turner and modified Mike MONCE HJG\nPanel by Ken Mitchell and modified by George CARTY HJG\nTexture by Tony MADGE HJG with engine textures by Todd MANBECK Mark C BOG/CO
|
|