|
|
Post by Nathan Ford - HJG on Sept 18, 2016 4:36:39 GMT
Hi everyone, I hope you are all enjoying happy flying.
I was just wondering if anyone has Shockwave light assignments for the DC-10s yet?
Cheers
Nathan |
|
|
|
Post by Tony Madge - HJG on Sept 18, 2016 8:54:27 GMT
Good question, sadly I don't have the answer  |
|
|
|
Post by aerofoto - HJG Admin on Sept 18, 2016 12:29:31 GMT
I don´t think we´ve ever had that particular data for the DC-10´s .... they´re too new and still subject to changes .... not that any of the chances we´re implementing should affect the baisc lighting as is currently supplied.
Someome (Bill A .... I think it was) did post SHOCKWAVE LIGHTINGH data for a number of other HJG aircraft types though .... and I think that thread was stickied on one of the forum pages.
I think SHOCKWAVE is a "payware" utility .... isn´t it ?
That being the case, and despite the fact that someone did post some data for it "HERE" .... for some of the HJG aircraft types .... we don´t actually provide support for it.
Mark C
BOG
|
|
|
|
Post by Benoit - HJG on Sept 18, 2016 13:07:00 GMT
Hi Nathan, try these settings written for SGA/Vistaliners some time ago and should work on the models hosted here at HJG.
Just copy and paste the info pertaining to Shockwave lights.
SGA DC-10 ( all models ):
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing, 6=nose gear
light.0=1, -0.90, 0.00, 18.70, DC10BCNU , //upper beacon
light.1=1, -30.70, 0.00, -3.00, DC10BCNL , //lower beacon
light.2=3, -74.00, -12.00, 34.50, DC10logo , //left logo splash
light.3=3, -74.00, 12.00, 34.50, DC10logo , //right logo splash
light.4=5, 88.35, -14.50, -4.00, DC10landing , //left landing light splash
light.5=5, 88.35, 14.50, -4.00, DC10landing , //right landing light splash
light.6=6, 82.00, 0.00, -3.50, DC10wing , //nose gear splash
light.7=5, 74.9, -8.5, 3.1, fx_Shockwave_landing_light // Shockwave light
light.8=5, 74.9, +8.5, 3.1, fx_Shockwave_landing_light // Shockwave light
light.9=5, 68.0, -0.5, -2.7, fx_Shockwave_landing_light // Shockwave light
light.10=5, 68.0, +0.5, -2.7, fx_Shockwave_landing_light // Shockwave light
light.11=2, -32.30, 84.15, 7.70, fx_shockwave_strobe.fx
light.12=2, -32.30, -84.15, 7.70, fx_shockwave_strobe.fx
Cheers
Benoit
|
|
|
|
Post by Nathan Ford - HJG on Sept 18, 2016 22:23:23 GMT
Thanks so much Benoit, you are a legend. I had been Googling "Vistaliners" and was coming up blank, never thought to try "SGA"!
I bought the Shockwave lights when they where on special sometime back and had used the post Tony put up to update the rest of my HJG fleet.
Thanks again for the wonderful help on the forum from all you wonderful people,
Nathan.
|
|
|
|
Post by Tony Madge - HJG on Sept 19, 2016 11:05:37 GMT
Many thanks, Shockwave lights thread on News board now updated  |
|
|
|
Post by aerofoto - HJG Admin on Sept 19, 2016 15:38:11 GMT
"THANKS" for that also Benoit  .... on behalf of those whom have, or whom intend to acquire, the SHOCKWAVE lighting utility and whom may wish to apply that data to/try it out with their DC-10´s. Be interesting to see some "before" and "after" pictures of the aplied effects in use with the DC-10´s Mark C BOG/CO |
|
|
|
Post by Nathan Ford - HJG on Sept 20, 2016 0:32:11 GMT
The lights look good, although the pictures don't do the justice.
There are two changes needed to be made to the lights, as the beacons don't show.
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing, 6=nose gear
light.0=1, -0.90, 0.00, 18.70, Fx_shockwave_beacon_rotating_red , //upper beacon
light.1=1, -30.90, 0.00, -3.00, Fx_shockwave_beacon_rotating_red , //lower beacon
light.2=3, -74.00, -12.00, 34.50, DC10logo , //left logo splash
light.3=3, -74.00, 12.00, 34.50, DC10logo , //right logo splash
light.4=5, 88.35, -14.50, -4.00, DC10landing , //left landing light splash
light.5=5, 88.35, 14.50, -4.00, DC10landing , //right landing light splash
light.6=6, 82.00, 0.00, -3.50, DC10wing , //nose gear splash
light.7=5, 74.9, -8.5, 3.1, fx_Shockwave_landing_light // Shockwave light
light.8=5, 74.9, +8.5, 3.1, fx_Shockwave_landing_light // Shockwave light
light.9=5, 68.0, -0.5, -2.7, fx_Shockwave_landing_light // Shockwave light
light.10=5, 68.0, +0.5, -2.7, fx_Shockwave_landing_light // Shockwave light
light.11=2, -32.30, 84.15, 7.70, fx_shockwave_strobe.fx
light.12=2, -32.30, -84.15, 7.70, fx_shockwave_strobe.fx
Changes are shown in red.
cockpit before....
cockpit after...
Exterior Before....
Exterior after...
One thing that the pics don't do is show up the 3D quality of the lights. I think they look really nice 
Cheers,
Nathan.
|
|
.... on behalf of those whom have, or whom intend to acquire, the SHOCKWAVE lighting utility and whom may wish to apply that data to/try it out with their DC-10´s.