RC-135/CFM-56

[grayrider]

I have been reading your requirments for posting screenshots.

I do have my own account with photobucket.com.Currently I have I think 7,000 shots posted/stored there for posting on websites, from WWII thru Comericals and lots of Airforce 135's/C-5's and numerous other military acft,and I have been with these planes and others since 1966.

My problem is all of my screenshots are 1280X960.In this case if I re-size them from 1280X960,that size is lost forever.because I delete them after I transfer them into photobucket.

I would like to as can you do what WSPilots.com does?,I can post my shots at WSPilots in my full size.There site will resize it automaticly.So when some one would look at it,they can click on the screenshot and it will enlarge to it's 1280X960 to get a better view of the screenshot.
Another website that takes all my 1280X960 shots is shockwaveproductions.com,but that is restricked to there acft or WWII acft. in general

I installed the RC-135 on Tuesday and took some test shots on the ground at Robins A.F.B.,Ga.
I do have all kinds of airforce 135's/C-5's/C-17's etc,etc,packages installed all over the country and overseas.

Since these may be to big for your requirments please deleete them.I want to at least show a few shots and I think HJG will be proud of these the way this model came out on my machine,which is high powered anyway and completely liguid cooled.maybe you can use a couple of these shots for such as advertisments,etc,etc.There are lots of memory's for me with this RC135 and others
So until I figure something out I will only post these one time because of the size.
These are some of the greatest freeware Airforce planes I have seen.HJG should be comended for hard and outstanding work creating these USAF and NAVY air machines.
SUPER JOB

Enjoy the ground shots at Robins or delete them.


















At least you will see how HJG and your paints came out on at least my machine

Thanks for looking at them,and I already have 30 of these planes installed so far.When I am done I will have all 707/135 varients installed.

My current FS9 hanger has just under 1800 type planes installed

Remember delete these if you must,and if HJG likes them,please use the pictures somewhere if you like them

GrayEider

[jetcopter55]

How do you get to place all of those static aircraft in the background? Also where did those building textures come from?

[Tony Madge - HJG]

Grayrider, lovely screenshots most impressive thanks for sharing them and also thank you for filling up your hanger with the HJG iron
I use photobucket but it auto stores my screenies to 800x600 I have no problem with these screenies, but then its not my board just sort of rented ( free) from Proboards. I will take a look through the rules etc and if there is a problem I will get back to you, if not then great they stay

[grayrider]

Hello Jetcoptor55

Hope you liked the shots I posted?.

Just to let you know I do not use any Static acft.,anyware in my FS9.What you are seeing in the shots is AI ANG packages by Dan "Delta" Bourque.I currently have other Mil. heavy AI packages installed all over the country and overseas.including Navy and Coast Guard.
All acft. fly as far as military AI packages,and believe me I have so many of them I lost count.

As far as the default building textures you are asking about.several months ago I found a freeware file that would improve all default building textures anywhere in FS9,and it worked.I will try to find the file I downloaded to add the default textures everywhere.I hope I didn't delete it.

Thanks for looking at the shots.as far as Military 707/135's I just about have all of the acft. installed from HJG.I think I have three more to go

GrayRider

[grayrider]

Hello Tony Madge

Thanks for looking at my few shots.Yes I have previously added to my hanger all of your DC-8's and a lot of your 707 models,comerical.and the CV-880/880M and the 990.

I have three more to go and I will have all of your military 707/135's installed.
The acft.in the screenshot the RC-135 brings a lot of realtime memories back for me.i spent several years on this model the RC-135 V/W/Q/and M models throughout different parts of the world.
The RC-135S at the time I didn't have a high enough security clearance to get on this model,except when it was in a phase dock configuration,if you know what I mean.I spent 5 years in Athens Greece with three of these models,classfied that is.
is HJG going to be coming out with Q and an M model of the RC-135?.I would like to be on one again

I did post a new topic in re-quards to the NKC-135A,since there are only two paints,the engines look a lot different both tail numbers.I am confused about which sound files to use,since the tal number 55-3123 looks like it has Turbojet or Fanjet engines on it.The outbd necelles look like they have some kind of pods on them,and I don't know what they are and what they were used for.
The other question I posted was asking does the NKC-135A have thrust reversers,if so they don't work.
The tail number 55-3129 the engines do look like the J-57 water injected engines,and I'm trying to figure out if and how the water injection works for the plane,because it needs it to get it off the ground.I was in SAC in 1966,and was on these KC-135's,being on alert duty,and believe me they are fully loaded on the way out.and the water injection burns 600 gallons of water a minute to get it off the ground including dumping fuel.

If you are one of the administrators could you look at my questions about the problem I am having with the NKC-135A?.I don't know how the one is I should be talking to about my problem with this acft.

THX

GrayRider

[jetcopter55]

The photos are fabulous!

[ddavid]

Magic - thanks for sharing - you have a fine stable there, Greyrider. One small question - do any of the '135' fuellers have an animated 'fuel boom' (sorry, I don't know the correct technical term)? I'd be grateful for some help.
Cheers - David.

[Tony Madge - HJG]

Re your questions I will put them to our 135 specialist

[grayrider]

hello ddavid

As far as all my KC-135 AI acft.go,no the IFR system doesn't work,however I do have a couple KC-135's I do fly and the IFR works.
The boom does go up and down,and the inner tube extends out the full 40 feet,and it even has the color coded rings on the boom as it comes out.I don't think anyone ever developed the means to pump gas from the tanker to say a fighter in FS9.It does look good in simulated mode,being almost connected to a fighter.It makes for a nice screenshot.
This plane does also have the PDI directional lighting system LED's on the FWD under belly of the plane.

THX

GrayRider

[ddavid]

Hi Tony, thanks for that - look forward to developments.......
and, Hi GrayRider - the animated IFR sounds excellent - is there any way of getting a similar facility to use myself - that would be good!
Thanks both for your time!
Cheers - David.

[yarek]

Really nice pics. You could resize them to 800x600 and upload (for free) on imageshack. It easier to watch them.
Anyway,
can You give us links to these military traffic? I was looking for but found nothing interesting :/

[grayrider]

Hello yarek

Thanks for looking at my shots

A lot of the Military Complete AI packages I have installed were created by Dan "Delta" Bourque and he was at fsgateway.com

That site has been re-done with a new look.The military AI pert of it was removed.

The websit Dan is working with is www.militaryaiworks.com This website has a new look as well.Go ahead and join there forums page,and you will find a lot of good folks there.Some of the authors that were at fsgateway.com are now all at www.militaryaiworks.com This site is dedicated to Military AI and military AI complete packages.

I have a lot of complete military AI packages other than Dan's collection.Some of them came from the UKMIL website from England,and I have several German Air Bases by Klaus Jone.You can find his packages on avsim,but you must follow his instructions closely.for me his packages were complicated,and you must chase down different things to install to make it all work.

When and if you go to www.militaryaiworks.com go to there screenshot page on there forums page,and you will see other screenshots I have posted there.my user name there is the same as it is here.

THX

GrayRider

[yarek]

Thank You for links, i was there and I figured that those traffic is for FSX. Does it work in FS9?
And their forum doesn't work :/ do I have to register first to make it work?

[grayrider]

All the downloads at militaryaiworks are for fs9,as far as I know.

Just join the forums page and do some surfing there.

I only us FS9 and I just downloaded five more of there complete packages

Remember those are all military AI for FS9

GrayRider

[bobdawkins]

As far as the default building textures you are asking about.several months ago I found a freeware file that would improve all default building textures anywhere in FS9,and it worked.I will try to find the file I downloaded to add the default textures everywhere.I hope I didn't delete it.

did you find it as I am interested