|
Post by leodirk on Dec 15, 2007 14:15:32 GMT
After installing the panel to the instructions in the manual into FSX. I have the following problem. The view from the main panel to the outside world is far too high. I can only see the clouds , no horizon or the runway in front of me. Is there anyone who can help me to solve this problem.
|
|
|
Post by aerofoto - HJG Admin on Dec 15, 2007 19:21:15 GMT
I understand these particular BAe 146 models and supporting data we currently host here are for FS2004 !
What you're seeing could be a (harmless) consequence of this .... but .... I'm only guessing.
With regard to your issue regarding ground view from the panel. You should be able to elevate and lower the ground horizon within FS by using SHIFT + BACKSPACE and SHIFT + ENTER keyboard commands.
Try that and see what happens !
This's not necessary in FS2004 of course .... but .... will have the same effect if applied.
Mark C AKL/NZ
|
|
|
Post by jonarnz on Dec 18, 2007 3:12:04 GMT
Hi, yes thats one of the 'compatibility' issues, hense the FSX specific version being worked on for release next year. If you want details on that go to the ARNZ X forum arnz.invisionplus.net/After installing the panel to the instructions in the manual into FSX. I have the following problem. The view from the main panel to the outside world is far too high. I can only see the clouds , no horizon or the runway in front of me. Is there anyone who can help me to solve this problem.
|
|
|
Post by leodirk on Dec 19, 2007 19:41:12 GMT
Hallo, Bedankt voor de reacties. Uiteraard had ik al eens geprobeerd om via de eypoint vieuws het voor elkaar te krijgen. Dat lukt echter niet. Naar mijn mening komt het voornamelijk door het laatste service pack van FSX. Ook accelaration x geeft hetzelfde resultaat. De horzon vanuit de cockpit is veel te hoog. Ik houd me voor suggesties aanbevolen. leodirk
|
|
|
Post by leodirk on Dec 19, 2007 19:47:23 GMT
Hi, Sorry, for mu last [post I did it in Dutch. So now the English version. Of course I have tried totchange the eypoint settings with the keyboard. But the horizon stays far to high. I have tried to look in the sdk if I can find a solution ther. I cannot. The problem is occured since accelartion X package is installed. Also ssp2 for fsX gives teh same result. The horizon of the ouside cockpit view in 2d mode is far too high. Hopefully ther is someone with more suggestions. Happy flying leodirk
|
|
|
Post by aerofoto - HJG Admin on Dec 19, 2007 19:47:50 GMT
|
|
|
Post by aerofoto - HJG Admin on Dec 19, 2007 19:52:41 GMT
Thanks "LEODIRK" ! OK .... the fundamental thing here is that the BAe 146-300 data that we offer "here" is intended for FS2004 use. It is not 100% FSX compliant. My understanding is that the FSX version is still "YET TO BE BUILT". Mark C AKL/NZ
|
|