|
Post by hitperson on May 30, 2011 19:21:32 GMT
guys i'm looking for a really good 737, i remember seeing one on a website a while back and i think it was for a classic but i cannot for the life of me remember the website.
would any of you have any ideas??
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 30, 2011 19:33:56 GMT
Hitperson, Some people says Ifly 737 Some people says PMDG 737. Some people said North Fifty. As for me I do not fly 737s:) Avoid Adaire's 737s. I think you will be happy with IFly 737s. Aharon
|
|
|
Post by botamern on May 30, 2011 20:18:08 GMT
For a real good 737NG, check out the one by iFly at www.iflysimsoft.com/. Unfortunately I don't know of any high quality 737 Classics for either the 737-100/200 or 737-300/400/500.
|
|
|
Post by jymp on May 30, 2011 23:25:39 GMT
Captain Sim has a 737-100/200 on the way, no idea as to when it will be available but it looks great from the shots on the Captain Sim website.
|
|
|
Post by aerofoto - HJG Admin on May 31, 2011 4:33:54 GMT
And one might as well regard the "TIN MOUSE 2" B737-200 panel and aircraft product "payware" .... since, last I was aware, it does require a fully licenced/payware version of FSUIPC in order for everything to work properly. The actual panel/aircraft package is a "FREE" download though at . I don´t think (to my knowledge) this fully licenced/payware version of FSUIPC issue/necessity has been resolved per the more recent release of this product .... since January 2011, but, I could be wrong .... so .... don´t take this statement as Gospel truth ! Other than this .... it´s a nice panel (by Richard PROBST), supported by multiple aircraft 3D model versions .... ranging from standard to hush-kitted engines, aircraft with gravel kits, and both standard PAX carrying and freighter aircraft models. There has been quite a bit of discussion on our own forum over many months past and in relation to this particular product per the following 2 links .... tonymadgehjg.proboards.com/index.cgi?board=news&action=display&thread=2424tonymadgehjg.proboards.com/index.cgi?board=placestoaskforhelp&action=display&thread=4351Mark C BOG/COL
|
|
|
Post by hitperson on May 31, 2011 6:26:09 GMT
For a real good 737NG, check out the one by iFly at www.iflysimsoft.com/. Unfortunately I don't know of any high quality 737 Classics for either the 737-100/200 or 737-300/400/500. that's the one, many thanks.
|
|
|
Post by walterleo on May 31, 2011 15:28:53 GMT
And one might as well regard the "TIN MOUSE 2" B737-200 panel and aircraft product "payware" .... since, last I was aware, it does require a fully licenced/payware version of FSUIPC in order for everything to work properly. The actual panel/aircraft package is a "FREE" download though at . I don´t think (to my knowledge) this fully licenced/payware version of FSUIPC issue/necessity has been resolved per the more recent release of this product .... since January 2011, but, I could be wrong .... so .... don´t take this statement as Gospel truth ! Other than this .... it´s a nice panel (by Richard PROBST), supported by multiple aircraft 3D model versions .... ranging from standard to hush-kitted engines, aircraft with gravel kits, and both standard PAX carrying and freighter aircraft models. There has been quite a bit of discussion on our own forum over many months past and in relation to this particular product per the following 2 links .... tonymadgehjg.proboards.com/index.cgi?board=news&action=display&thread=2424tonymadgehjg.proboards.com/index.cgi?board=placestoaskforhelp&action=display&thread=4351Mark C BOG/COL Hi! Its true its one of the best freeware olanes and panels you can get, but under FS 2004 the included free FSUIPC works without problems. Some minor problems occure if you use Tin-Mouse and the Cantu-model together, cause the trim/MAC of Cantus model is totally different, so you better not change between them inflight. Walter
|
|
|
Post by aerofoto - HJG Admin on May 31, 2011 16:39:49 GMT
OK .... so that the implies there has been an FSUIPC related change to the TM2 product since January. Thanks Walter ! Anyone out there familiar with the most recent/current file version numbers for this TM2 product ? Mark C BOG/COL
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 31, 2011 18:58:47 GMT
Hitperson, I suggest Ifly products too Guess you must have missed my post Happy flying Aharon
|
|
|
Post by hitperson on May 31, 2011 20:46:40 GMT
Hitperson, I suggest Ifly products too Guess you must have missed my post Happy flying Aharon oops, sorry.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 31, 2011 22:58:04 GMT
Hitperson, no worries:) That is nice signature you have!! Aharon
|
|
|
Post by walterleo on Jun 2, 2011 19:14:46 GMT
OK .... so that the implies there has been an FSUIPC related change to the TM2 product since January. Thanks Walter ! Anyone out there familiar with the most recent/current file version numbers for this TM2 product ? Mark C BOG/COL Did download today Tinmouse II ver 1.3 (of Dec 2010). you SHOULD HAVE fsuipc 3.70 or higher which I have, BUT you should load FS2AUDIO.DLL into Windows/system32, which I did, but FS9 did not recognize it. Therefor the new panel doesn't work for me, I you ver 1.2 instead, which works. The flaps come out and retract with F6 F7. A shot of the AVIACSA repaint: www.protu-154.net/forum/viewtopic.php?p=188885#188885Kind regards Walter
|
|
|
Post by aerofoto - HJG Admin on Jun 2, 2011 21:50:05 GMT
Funny you should mention that FSAUDIO.DLL file and it´s WINDOWS/SYSTEM32 installtion .... because I ran into "precisely the same issue" as you report too .... with the January 2011 version update of this product.
In my case my selected TM2 B737-200 loaded into the FS Menu Preive Screen, but, wouldn´t proceed any further from there .... because FS9 simply "STOPPED" right there. As I recall .... I was forced to use CNTRL+ALT+DELETE keyboard commands in order to exit FS.
I then removed, that latest version of the TM2 product from FS and reinstated the much older previous version .... from prior to December 2010.
The panel and FDE still have some minor/irritating quirks .... but .... on the whole it´s a "NICE PRODUCT"
Mark C BOG/COL
|
|
|
Post by Eduardo JT8D - HJG on Jun 3, 2011 6:42:59 GMT
For -300/-400/-500 50North is good. However, it is only model and its respective textures without a panel or sounds but other than that i find it great.
Regards Eduardo
|
|
|
Post by walterleo on Jun 3, 2011 12:24:23 GMT
Funny you should mention that FSAUDIO.DLL file and it´s WINDOWS/SYSTEM32 installtion .... because I ran into "precisely the same issue" as you report too .... with the January 2011 version update of this product. In my case my selected TM2 B737-200 loaded into the FS Menu Preive Screen, but, wouldn´t proceed any further from there .... because FS9 simply "STOPPED" right there. As I recall .... I was forced to use CNTRL+ALT+DELETE keyboard commands in order to exit FS. I then removed, that latest version of the TM2 product from FS and reinstated the much older previous version .... from prior to December 2010. The panel and FDE still have some minor/irritating quirks .... but .... on the whole it´s a "NICE PRODUCT" Mark C BOG/COL Hi: Should have mentioned that this FS2AUDIO.dll should go into the windows/system32 folder, which I did, same result as yours. But the model and airfile of ver 1.3 work together with the panel of ver 1.2 and with the repaints of ver. 1.2 also. Therefore I use the old panel with the new model, which seems has better flying qualities, but no autothrottles, sorry! But maybe that is the solution: forum.avsim.net/topic/321736-new-tinmouse-ii-b732-released/Kind regards Walter
|
|