|
Post by angelone on Dec 6, 2011 19:42:45 GMT
I am new to this website and I would like to know if anyone knows the light config from the L1011 so strobes can be added to the end of the wings. I would be greatful to all the kind assistance.
|
|
|
Post by +mrfaosfx on Dec 6, 2011 20:47:07 GMT
The present L-1011 does not have strobes? Why would something like that be left out? Strange.
|
|
|
Post by aerofoto - HJG Admin on Dec 6, 2011 22:43:47 GMT
Essentially because what we have there .... "AS-IS" .... is the way it all was when first supplied to us (we did no modification work "there" whatsoever .... and "TIME" .... at the time .... wasn't on our side do try'n do so in any case) .... but more importantly ..... for the following reasons as noted, by me, within our "L1011 PANEL INSTALLATION & HANDLING NOTES" ....
As can be seen (above) .... a STROBE lighting NOTAM does appear among these notes .... albeit in reation to other factors though.
Mark C AKL/NZ
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 6, 2011 23:16:26 GMT
If you are referring to green and red lights on wingtips of Vistaliners L1011, mine is working well for FSX.
|
|
|
Post by aerofoto - HJG Admin on Dec 6, 2011 23:20:58 GMT
NAH .... those red and green port and starboardlights are NAV lights Aharon .... and as you say they do work fine The STROBES are those white lights located on the trailing edge of each wing tip .... and which do also work fine too .... subject to/impaired only in regards to that NOTAM which I released. Mark
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 7, 2011 2:27:03 GMT
ohhh I think I have those white lights too.
My apologies for mixing them up!!
Aharon
|
|
|
Post by garryrussell on Dec 7, 2011 10:50:06 GMT
Just a thought....I don't have the TriStar but does it have wing flex?
I would have thought many of the liveries here would not have had strobes.
|
|
|
Post by kevinr on Dec 7, 2011 17:22:39 GMT
The L1011 does have wing flex, and the STROBES are in the .cfg file and are 'placed' at the wingtips in flying position. So, it looks OK when flying, but are above and appear to be floating when it's on the ground.
BTW, keyboard command 'O' toggles the strobes...
|
|
|
Post by garryrussell on Dec 7, 2011 17:36:15 GMT
That's why I asked.
With wing flex they have to be modelled not position set by the CFG
So really they should be deleted from the cfg as they are not joined to the wing properly.
|
|
|
Post by aerofoto - HJG Admin on Dec 7, 2011 18:17:40 GMT
This's why I wrote this NOTAM .... 1 year ago To alert people to the fact .... The STROBE LIGHTING is not hard coded into the model .... and .... the wings do flex .... resulting in the STROBES then "appearing" offset/seperated from their trailing edge wing tip surfaces "whilst on the ground". Only during T/O do the wings start to the wings flex upwards .... resulting in STROBE LIGHTING then beginning to align with the wing tip trailing edge more-or-less perfectly. There's nothing we can do about this .... at this time .... short of a new model with redesigned features being released, but which, I very much doubt will happen quickly .... if at all. Mark C AKL/NZ
|
|