|
Post by Klaus Hullermann on Apr 1, 2017 14:24:54 GMT
Hi there!
I have a small problem with the BAe 146-200QT: I can't open the big cargo-door via the 'Wingfold'-keystroke (And yes, I have assigned a keystroke to this funktion). I've tried it with two -200QTs: The first one had the BAe-panel from the HJG-page and the second had the one from the default 747. But both birds didn't let me open the big cargo-door.
Could it be that the entry for the 'Wingfold'-function in the aircraft.cfg is 'corrupted'?
Klaus
|
|
|
Post by aerofoto - HJG Admin on Apr 1, 2017 19:58:28 GMT
I truly don't know Klaus .... As can be seen per the following image which accompanies the base pack .... .... and as per each of the following model images presented within our forum based online manual too .... All HJG supplied PAX version ARJ/BAe models feature opening/animated forward fuselage exits and operating rear fuselage air brake doors and wing spoilers as follows .... All HJG supplied freighter/transport version ARJ/BAe models feature opening/animated forward fuselage exits and port side rear fuselage maindeck cargo doors and operating rear fuselage air brake doors and wing spoilers as follows .... The animation of all port side forward fuselage PAX exits are controlled per standard/default FS door open/close keyboard commands. The animation of all port side rear fuselage maindeck cargo doors are controlled per customized FS keyboard command assignments .... see below .... - SHIFT+E (open/close Door 1L) - WINGFOLD keyboard commands (open/close port side rear fuselage maindeck cargo door .... "BAe 146-100 QT, BAe 146-100 STA MSL/MT, BAe 146-200 QT, BAe 146-200 QC C3, and BAe 146-300 models only"). PLEASE NOTE: This particular animation command must be manually assigned within the FS OPTIONS/CONTROLS/ASSIGNMENTS menu. Failure to correctly apply or assign the required keyboard commands will result in these model animations not functioning. .... everything works/should work OK. Upon reading your report I've since checked the base pack .... and the -200 QT model is correct "according to the date of the last model release for the -200 QT that I have" .... and the CFG based EXIT/WINGFOLD data for it is also correct too. I may have to get Paul to help me with this .... and get back to you later. In the meantime I've determined that the freight doors on the -100 QT, the 2X STA's, the -200 QC/C3, and the -300 QT also .... are all working correctly, so, whatever the issue may be seems to be related to just the -200 QT model only. Might take a few days to get back to you on this Klaus. Mark C AKL/NZ
|
|
|
Post by aerofoto - HJG Admin on Apr 1, 2017 23:24:15 GMT
OK .... Paul's identified the problem and resolved it An 11 + 3/4 hour change applied to the the BAe 146-200 QT model prior to our releasing it for upload back in January. The cargo door animation previously worked "fine" .... as is evidenced by my manual images just prior to its release .... but .... it looks like our applied last minute edit "broke" something else which we didn't detect at that time ANYWAY Paul's "FIXED IT" .... as can be seen per the new image below ..... .... and has supplied a "new" model, so, I'll compile a new BAe 146-200 QT base pack for Tony to upload later .... and either he, or I, will advise as soon as soon as this new/replacement file is available .... so bear with us please .... until the announcement is made. "THANKS" for letting us know Klaus AND .... "THANKS" Paul also for your diligence and prompt attention too Mark C AKL/NZ
|
|
|
Post by Tony Madge - HJG on Apr 2, 2017 8:35:50 GMT
Base model for the 200QT now replaced and the door works
|
|
|
Post by Klaus Hullermann on Apr 2, 2017 8:47:23 GMT
Thank you guys! Now that's what I call customer-support!! I will try out the -300QT and -100QT as well (let's just hope this problem was in the -200QT only).
I will keep you informed.
EDIT: I've tested the other QTs/QCs (146-100, -200, -300 and their military variants) and all of them have a working cargo-door. So it seems that the -200QT were the only one which were faulty.
Klaus
|
|
|
Post by aerofoto - HJG Admin on Apr 2, 2017 9:46:21 GMT
It was "the -200 QT only" that wasaffected .... for the reasons I mentioed above Mark C AKL/NZ
|
|