|
Post by gracov on Nov 3, 2017 11:11:06 GMT
Every thing else works beautifully but I can only change the first number on both adf's. I have hovered over every part of the unit without success. can you help?
|
|
|
Post by aerofoto - HJG Admin on Nov 3, 2017 11:48:11 GMT
ADF1/ADF2 frequencies are set using the ADF1 and ADF2 selector knobs located within the lower left portion of the the CP sub panel .... among other radio/NAV selector knobs located within the same CP sub panel section. Left mouse clicking around the upper or lower left rim of each of the 2 ADF frequency selector knobs reduces the selected ADF frequency. Left mouse clicking around the upper or lower right rim of each of the 2 ADF frequency selector knobs raises the selected ADF frequency. All ADF adjustments are ctycled per individual units .... MEANING .... there´s a fairly large cycling range in order to set any complete ADF frequency, but, that´s how these particular gauge were designed .... and not by HJG incidentally. ADF1/ADF2 indicatios are then engaged, and displayed, within the RMI gauge on the MP using the rabbit ear switches located outside the the bottkem left and right rims of the RMI gauge .... and which are clearly placarded as such. Each of these features works perfectly Mark C BOG/CO
|
|
|
Post by Mike Monce - HJG on Nov 3, 2017 12:19:07 GMT
I might also add that there's a strange FS bug in which the avionics don't respond on some systems with some panels. It happens on my system with some planes. I've never understood or found an explanation. Anyway, the easy fix is to simply make sure the avionics switch is on in the C172 BEFORE loading the preferred plane. that state of the C172 panel carries over to the next loaded plane, and will usually solve the radio tuning issue.
Of course it's standard practice to always load your plane on top of the default C172.
Mike
|
|