ber
CV-880
Posts: 2
|
Post by ber on Mar 14, 2018 18:25:39 GMT
When i install this aircraft and fly it all is well, but when i load it the second time I have no oil pressure ( and no oil temp)?? It's such a beautifull aircraft. I'm using fs2004 and the 4x3 panel
|
|
|
Post by mariopilot - HJG Guest on Mar 14, 2018 20:23:32 GMT
Hello!
BLIMEY! I think you discovered a bug! did you deactivate failures from the settings panel? I discovered that if you do so, Oil Temp / Press die. A very rookie coding mistake! I had a number of other little things fixed, so this shall be fixed next update. In the meantime, WITH THE AIRCRAFT PARKED ON GROUND, click the little wrench icon ("Settings" in the lower right corner of the panel icons) and check if "FAILS" is yellow steady. If not, click it to activate failures simulation (no random failures, only stuff that goes bad if you really push it). If FAILS is flashing, press RESET. Let me know if this gets your oil temp / press back!
|
|
ber
CV-880
Posts: 2
|
Post by ber on Mar 14, 2018 20:48:29 GMT
Hello Mario Thanks very much! It works! My compliments with this beautifull aircraft. One of the best Regards Ber
|
|