|
Post by darrenvox on May 26, 2019 22:12:36 GMT
when downloading the dc-9-10 and a texture and then adding the fsfsconv panel thing to the aircraft i go in and try to start things and i get "sound creation not found"...is it that i havent added sound to the aircraft or what is it??
things dont move on the panel and after a while everything freezes and i close out the sim and get this above error!!
how is this fixed or is it something someone posted before
|
|
|
Post by aerofoto - HJG Admin on May 26, 2019 22:38:33 GMT
Assuming you're using FS9 .... and assuming you're using the Panels we offer also .... Where have you installed the FSSOUND.DLL module ?And equally importantly .... Where have you installed the FSGAUGESOUND.DLL ?These are 2 different panel modules .... which must be installed in 2 different destination folders .... as explained per the installation instructions If one has difficulty following the installation instructions provided within the ZIP files (although these "are" pretty clear and straight-forward and explain the above details) .... then .... refer to the simplified/clarified installation instructions contained within our following linked forum based online DC-9 manual .... tonymadgehjg.proboards.com/thread/3435/hjg-panel-installation-handling-notesSee PP1 .... Sections 6, 7, 8, and 9 of the above-linked manualI'm pretty sure you've probably got 1 of the 2 required modules folders in the wrong file .... or have missed installing one of them .... as nothing else, that I'm aware of, would result in what you describe. Mark C AKL/NZ
|
|
|
Post by darrenvox on May 26, 2019 22:42:49 GMT
had an extra fssound.dll in main folder..deleted and.done!!
|
|
|
Post by aerofoto - HJG Admin on May 26, 2019 22:51:03 GMT
Thought so .... "years of experience" you see With regard to DC-9 panel installation .... ensure each of the following advised steps are followed "to the letter" .... All as per the above-linked manual ALSO .... Ordinarily one can't have 2 FSSOUND.DLL's or one will overwrite the other .... use the version provided by HJG. The FSSOUND.DLL and GAUGESOUND.DLL are "not" the same and both "must" be installed for these DC-9 panels Mark C AKL/NZ
|
|