Post by lovecraft on Oct 22, 2008 11:45:42 GMT
Hi all, i`m new here and thanks for your ospitality.
my issue:
i downloaded the Base pack Boeing 707-120B + the sound and the panel for B707-120B (section panels)
1. i extract the 707 120B (aircraft) zip and the folder of the aircraft moved into the Fs9 aircraft folder
2. installed the panel from the zip file into the F9 aircraft/panel folder
note: i installed only the base pack of the aircraft.
3 i follow the point n.4>>> To make this panel display with your aircraft model you must open the "PANEL" folder inside your HJG B707-120B aircraft. It will contain a notepad named "PANEL". Open this notepad and by default it should read as follows :-
[fltsim]
alias=B737_400\panel
5. Pay attention to the line "ALIAS=B737_400\PANEL". Change this line to read exactly as follows :-
alias=fsfsconv\panel.b707-120b
The completed note pad entry will then look like this :-
[fltsim]
alias=fsfsconv\panel.b707-120b
so, the Panel.cfg i changed and saved.
Start the sim and there is no in the list the boeing 707 !
What is wrong?
----------------------------------------------------------------------------
NOTE: THIS IS WHAT IN THE PANEL.CFG I CAN SEE before to change
// This Panel.cfg file created by CfgEdit
// Built Monday, May 08, 2006 at 21:30 Build:15090
[Window Titles]
Window00=Introduction Panel
Window01=Captain's Panel
Window02=First Officer's Panel
Window03=Windscreen Wiper
Window04=Autopilot Popup
Window05=V-speeds Popup
Fixed Window30=Forward Right
Fixed Window31=Right
Fixed Window32=Flight Engineer Panel (SHIFT+Keypad 3)
Fixed Window33=Rear
Fixed Window34=Rear Left
Fixed Window35=Left
Fixed Window36=Forward Left
Fixed Window37=Up
Fixed Window38=Lower Panels
[VIEWS]
view_forward_WINDOWS=MAIN_PANEL
VIEW_FORWARD_DIR=2.0, 0.0, 0.0
VIEW_FORWARD_RIGHT_WINDOWS=30
VIEW_RIGHT_WINDOWS=31
VIEW_REAR_RIGHT_WINDOWS=32
VIEW_REAR_RIGHT_DIR=2.0, 0.0, 90.0
VIEW_REAR_WINDOWS=33
VIEW_REAR_ZOOM=1.5
VIEW_REAR_LEFT_WINDOWS=34
VIEW_REAR_LEFT_ZOOM=1.5
VIEW_LEFT_WINDOWS=35
VIEW_FORWARD_LEFT_WINDOWS=36
VIEW_UP_WINDOWS=37
VIEW_DOWN_WINDOWS=38
[Window00]
file=introscreen.bmp
size_mm=1024
window_size_ratio=1.00
position=7
visible=1
ident=0
window_size= 1.000, 0.450
window_pos= 0.000, 0.550
gauge00=707-120!intro, 70,10,884
[Window01]
file=Captain.bmp
size_mm=1024
window_size_ratio=1.00
position=0
visible=1
ident=15
window_size= 1.000, 1.000
window_pos= 0.000, 0.000
gauge00=707-120!captain, 0,330,370
gauge01=707-120!airspeed, 80,483,80, ,1
gauge02=707-120!coord, 79,580,80, ,1
gauge03=707-120!mach, 78,677,80, ,1
gauge04=707-120!warn1, 262,419,21
gauge05=707-120!adi, 178,468,123,125,1
gauge06=707-120!hsi, 173,578,125, ,1
gauge07=707-120!alt, 317,483,80, ,1
gauge08=707-120!rmi, 310,578,94
gauge09=707-120!dme, 318,690,77
gauge10=707-120!vsi, 420,485,80
gauge11=707-120!clock, 421,580,80
gauge12=707-120!fdswitch, 522,384,83
gauge13=707-120!alt2, 523,429,80,81
gauge14=707-120!oilleft, 536,622,74
gauge15=707-120!fire, 611,282,371,104
gauge16=707-120!engine1-jt3d, 623,392,66,330
gauge17=707-120!engine2-jt3d, 689,392,66,330
gauge18=707-120!engine3-jt3d, 755,392,66,330
gauge19=707-120!engine4-jt3d, 821,392,66,330
gauge20=707-120!config, 897,359,51,73
gauge21=707-120!flaps, 894,469,53
gauge22=707-120!oilright, 894,646,57
gauge23=707-120!gear1, 959,348,64
gauge24=707-120!compass, 782,77,60
gauge25=707-120!xlight, 604,9,420
gauge26=707-120!switches1, 324,3,135
gauge27=707-120!rswitch, 450,3,17
gauge28=707-120!switchap, 430,746,17
gauge29=707-120!surfaces, 525,525,78,80
AND THE REST
Question i have to delate all and paste only:
[fltsim]
alias=fsfsconv\panel.b707-120b
or i leave all paste this
[fltsim]
alias=fsfsconv\panel.b707-120b
Thanks ihope its clear and someone can help me
i really like to have your Fantastic aricrafts.
Regards
Claudio
my issue:
i downloaded the Base pack Boeing 707-120B + the sound and the panel for B707-120B (section panels)
1. i extract the 707 120B (aircraft) zip and the folder of the aircraft moved into the Fs9 aircraft folder
2. installed the panel from the zip file into the F9 aircraft/panel folder
note: i installed only the base pack of the aircraft.
3 i follow the point n.4>>> To make this panel display with your aircraft model you must open the "PANEL" folder inside your HJG B707-120B aircraft. It will contain a notepad named "PANEL". Open this notepad and by default it should read as follows :-
[fltsim]
alias=B737_400\panel
5. Pay attention to the line "ALIAS=B737_400\PANEL". Change this line to read exactly as follows :-
alias=fsfsconv\panel.b707-120b
The completed note pad entry will then look like this :-
[fltsim]
alias=fsfsconv\panel.b707-120b
so, the Panel.cfg i changed and saved.
Start the sim and there is no in the list the boeing 707 !
What is wrong?
----------------------------------------------------------------------------
NOTE: THIS IS WHAT IN THE PANEL.CFG I CAN SEE before to change
// This Panel.cfg file created by CfgEdit
// Built Monday, May 08, 2006 at 21:30 Build:15090
[Window Titles]
Window00=Introduction Panel
Window01=Captain's Panel
Window02=First Officer's Panel
Window03=Windscreen Wiper
Window04=Autopilot Popup
Window05=V-speeds Popup
Fixed Window30=Forward Right
Fixed Window31=Right
Fixed Window32=Flight Engineer Panel (SHIFT+Keypad 3)
Fixed Window33=Rear
Fixed Window34=Rear Left
Fixed Window35=Left
Fixed Window36=Forward Left
Fixed Window37=Up
Fixed Window38=Lower Panels
[VIEWS]
view_forward_WINDOWS=MAIN_PANEL
VIEW_FORWARD_DIR=2.0, 0.0, 0.0
VIEW_FORWARD_RIGHT_WINDOWS=30
VIEW_RIGHT_WINDOWS=31
VIEW_REAR_RIGHT_WINDOWS=32
VIEW_REAR_RIGHT_DIR=2.0, 0.0, 90.0
VIEW_REAR_WINDOWS=33
VIEW_REAR_ZOOM=1.5
VIEW_REAR_LEFT_WINDOWS=34
VIEW_REAR_LEFT_ZOOM=1.5
VIEW_LEFT_WINDOWS=35
VIEW_FORWARD_LEFT_WINDOWS=36
VIEW_UP_WINDOWS=37
VIEW_DOWN_WINDOWS=38
[Window00]
file=introscreen.bmp
size_mm=1024
window_size_ratio=1.00
position=7
visible=1
ident=0
window_size= 1.000, 0.450
window_pos= 0.000, 0.550
gauge00=707-120!intro, 70,10,884
[Window01]
file=Captain.bmp
size_mm=1024
window_size_ratio=1.00
position=0
visible=1
ident=15
window_size= 1.000, 1.000
window_pos= 0.000, 0.000
gauge00=707-120!captain, 0,330,370
gauge01=707-120!airspeed, 80,483,80, ,1
gauge02=707-120!coord, 79,580,80, ,1
gauge03=707-120!mach, 78,677,80, ,1
gauge04=707-120!warn1, 262,419,21
gauge05=707-120!adi, 178,468,123,125,1
gauge06=707-120!hsi, 173,578,125, ,1
gauge07=707-120!alt, 317,483,80, ,1
gauge08=707-120!rmi, 310,578,94
gauge09=707-120!dme, 318,690,77
gauge10=707-120!vsi, 420,485,80
gauge11=707-120!clock, 421,580,80
gauge12=707-120!fdswitch, 522,384,83
gauge13=707-120!alt2, 523,429,80,81
gauge14=707-120!oilleft, 536,622,74
gauge15=707-120!fire, 611,282,371,104
gauge16=707-120!engine1-jt3d, 623,392,66,330
gauge17=707-120!engine2-jt3d, 689,392,66,330
gauge18=707-120!engine3-jt3d, 755,392,66,330
gauge19=707-120!engine4-jt3d, 821,392,66,330
gauge20=707-120!config, 897,359,51,73
gauge21=707-120!flaps, 894,469,53
gauge22=707-120!oilright, 894,646,57
gauge23=707-120!gear1, 959,348,64
gauge24=707-120!compass, 782,77,60
gauge25=707-120!xlight, 604,9,420
gauge26=707-120!switches1, 324,3,135
gauge27=707-120!rswitch, 450,3,17
gauge28=707-120!switchap, 430,746,17
gauge29=707-120!surfaces, 525,525,78,80
AND THE REST
Question i have to delate all and paste only:
[fltsim]
alias=fsfsconv\panel.b707-120b
or i leave all paste this
[fltsim]
alias=fsfsconv\panel.b707-120b
Thanks ihope its clear and someone can help me
i really like to have your Fantastic aricrafts.
Regards
Claudio