|
|
Post by bell412 on Jun 25, 2006 18:58:31 GMT
rather FS wants to disable it, I click ok, and then the system is STUCK, and I have to shut down the HARD WAY!
I haven't read of this problem here yet, any hints at a fix?
Craig
|
|
|
|
Post by bell412 on Jun 25, 2006 19:40:41 GMT
The 707-320.gau does it too. No biggie, I like Goldings panel fine, as I'm a get in and go kinda simmer...LOL...;o) Thanks for a GREAT site for GREAT planes!! Craig P.S. Any Kopter Kids here? If so, go here... www.hovercontrol.com/and D/L Jordan Moore's Bell 412. Rock steady @ 300 KNOTS!! Realistic NO, fun U BET....LOL.....;o) Use it to chase yer AI JETS!!! |
|
|
|
Post by aerofoto - HJG Admin on Jun 25, 2006 21:07:52 GMT
I tested both 707-120.GAU and 707-320.GAU pretty thorougly on more than one computer.
In fact we originally started out with more than 1 version of each gauge set at the very beginning then narrowed it down to the best performing example of each .... of course.
Throughout the testing phase neither gauge set was found to be causitive of any crashes whatsoever.
System variables may come into play here, and if that is indeed the case, then there's probably not much "we" can do about it .... unfortunately.
However I invite you to tell us briefly about your system configuration and how you've installed everything.
George CARTY (our B707 panel designer and gauge programmer) may be able to better assist later on the basis of information you provide.
Mark C
AKL/NZ
|
|
|
|
Post by bell412 on Jun 25, 2006 22:07:28 GMT
Installed according to instructions,
the 3 gau files into gauges folder, the 'panel' folder into
aircraft / fsfsconv folder, then aliased the aircraft pnl.cfg file to the panel
straight forward install, must be the system, Pentium III 1 gig cpu, 256 RAM, geforce 2, 34 meg vid, sound blaster sound.
I dunno, anyway I'll keep using the Golding panel, it works great...;o)
Thanks for your help,
Craig
|
|
|
|
Post by bell412 on Jun 26, 2006 0:17:09 GMT
I have "OLDMODULES" as shown, I fiddled with the sound a bit, but still no go...!
LAUNCHED it all and I'm back to P. Goldings GREAT panel!
Anyone remember the old FS98 CARP, (Chris Arrington, R. Probst), 707-100 panel?
That should be updated to FS9, it was WAY ahead of it's time!!
ThanX for all help.... ;D
Craig
|
|
|
|
Post by aerofoto - HJG Admin on Jun 26, 2006 22:38:20 GMT
Just as a matter of curiosity. Before you installed the new B707 panel/s did you first delete the original HJG supplied AIRCRAFT.CFG & AIR.FILE data with youraircraft model .... and replace it with the new FDE data contained within each of the new B707/720 Base Packs ? There has been significant modification to this FDE data. If using George's panels the new FDE data must be applied to your aircraft first .... or .... it's feasable you "may" experiece problems with the panels. Just a long shot  Mark C AKL/NZ |
|
|
|
Post by Harerton Dourado - HJG on Jun 27, 2006 0:14:14 GMT
Another suggestion: try deleting or renaming your fs9.cfg before launching FS. You'll have to add the old moudules section again and reconfigure the video settings but sometimes it solves many issues.
|
|
|
|
Post by bell412 on Jun 27, 2006 2:41:04 GMT
Both the '120.gau', and the '320.gau' were used with AC that had the NEWEST FDE's.
I didn't think to try a 'NEW' fs9.cfg file and since I've deleted it all, it's 2 late.
I'll come back for the new panel when I get a newer/better puter, as this one is on it's last leg...LOL....;o)
And THAT will probably coincide with the advent of FSX... ;D ;D
|
|
|
|
Post by George Carty - HJG on Jul 11, 2006 7:34:14 GMT
rather FS wants to disable it, I click ok, and then the system is STUCK, and I have to shut down the HARD WAY! I haven't read of this problem here yet, any hints at a fix? Craig What OS are you running? I've found that my panel works in XP, but is incompatible with Windows 98. |
|
