|
Post by zapilot on Mar 19, 2010 10:38:01 GMT
Hello... Hope I'm in the right place to ask 'bout this problem. I'm enjoying flying the 727. The quality is excellent..so thanks for your commitment and work. One little glitch. The digits on the 'VR ref. Landing table,' 'FE Report' (if these are the right terms) are not showing properly. They're unreadable. (please see attached panel pic) Do you have any ideas as to what might cause this and of course solutions please? Any help would be greatly appreciated as these seem to be really helpful as part of the flights Thanks ZA
|
|
|
Post by aerofoto - HJG Admin on Mar 19, 2010 10:48:52 GMT
I've never .... ever.... before heard of such an issue with any of these panels.
I really don't know what to advise (other than your issue may be graphics or display adapter related) .... because, so far as I'm aware, no such issue has ever been previously detected/reported.
All of that data should display .... "automatically' .... whenever that particular panel/window (along with its sub windows too) is commanded into view !
You have done a TEXT BOOK install .... as perscribed per the Installation Instructions .... tand taking care to put everything into the recomended folders .... with no other side editing at all .... right ?
Mark C AKL/NZ
|
|
|
Post by Harerton Dourado - HJG on Mar 19, 2010 13:24:22 GMT
Hi,
You are possibly missing the Tahoma and Tahoma Bold fonts in your system. Check if they are present.
Best regards,
|
|
|
Post by zapilot on Mar 19, 2010 17:20:36 GMT
Hello... Thank you for your responses. Thanks Harerton, I have the Tahoma font (not bold though) Wish it was that easy... As far as I'm aware I did as instructed re: the instructions. I haven't "side edited" either .The 'panel' works...i.e. it computes (if that's the correct term) it's possible to see this in part. Sooo....if this is so unique..which it seems to be..then it must be a problem with my graphics. Thanks for your time..I'll try to get round it. Best regards ZA
|
|
|
Post by zapilot on Mar 19, 2010 17:59:09 GMT
Hi Again... I think this is a problem at my end. Harerton, I said I had Tahoma..I didn't realise that you meant actually in FSX...Doh! I discovered the 'Font' file..and there's no Tahoma in there. There's LCD and others but not that particular font. Could this be the issue? If it is..then the next Q is how do I actually get Tahoma font in there..and of course is this usual? Again..Thanks for your time Best Wishes ZA
|
|
|
Post by Harerton Dourado - HJG on Mar 28, 2010 4:10:45 GMT
I believe you need them in the windows font folder.
|
|
|
Post by zapilot on Jun 17, 2010 18:31:04 GMT
Hello All. Back in March I had this problem with unreadable digits in the 727 and in all other AC with this sort of display. Aerofoto :
You were spot on with the graphics display suggestion . Installed a new GC today, and all is well. I can now enjoy these excellent AC to their full. This problem has plagued me for sometime now, despite having a number of so called upgrades. Thanks again for the suggestions received ZA
|
|