|
|
Post by valencia on Nov 3, 2010 17:40:37 GMT
I get something wrong with the DC 8-50 with Viasa texture. Fuselage and engines a black..... Apologies if the fault lies with me......
|
|
|
|
Post by aerofoto - HJG Admin on Nov 3, 2010 21:34:07 GMT
Sounds to me like you're using your VIASA DC8-50 texture with the wrong DC8-50 model .... or .... the wrong DC8 AIRCRAFT BASE PACK .... possibly a -30, or -40, base pack. You should be using all DC8-50 textures with the DC8-50 AIRCRAFT BASE PACK .... available on the "DC8-50" downloads page. AND .... you should be using all DC8-50F textures with the DC8-50F AIRCRAFT BASE PACK .... available on the "DC8-50F" downloads page. There are separate AIRCRAFT BASE PACK files for each class of DC8 and it is important that these textures are all applied to the right one .... or .... it will result in (a) aircraft fuselages with half of their textures missing .... or (b) texture-less aircraft engines .... or (c) inaccurate aircraft performances .... or (d) "all of these"   Assuming you are using the following VIASA DC8-50 texture .... 1967 - YV-125C - DC-8-53
Textures by Michael Verlin
Last Updated: 05 Jun 2006.... then you should be using that texture with the following DC8-50 AIRCRAFT BASE PACK .... DC-8-50
Version 5.0
Last Updated: 19 Dec 2007Within this DC8-50 AIRCRAFT BASE PACK there are 2 models .... named as follows .... model
model.ship1The above VIASA DC8-50 texture should be assigned to the standard "MODEL" file .... meaning the MODEL= data line of your AIRCRAFT.CFG/ADD TO AIRCRAFT data should then read as follows .... Model=.... and be saved just like that  Mark C AKL/NZ |
|
