Missing Texture files for HJG_AI_HI Douglas_DC-8-61_v1.00

[jegs]

There are two .bmp texture files missing from texture.AI_air_jamaica_1971_61_6y-jgh folder for the HJG_AI_HI Douglas_DC-8-61_v1.00. The front half of the model is all black, while the back half has the correct texture. See attachment.

I think the files missing are:

HJG_AI_DC-8_61_HIFI_SHEET1_L.bmp

HJG_AI_DC-8_61_HIFI_SHEET2_L.bmp

Can anyone help?

[aerofoto - HJG Admin]

There's no missing texture files from any of the HJG DC-8 texture packages.

The only reason what you're seeing, per your attached image, is likly to occur is if you're using that AIR JAMAICA DC-8-61 texture with "the wrong" DC-8-61 aircraft base pack and 3D model.

Check that you're using this AJ texture with the standard HJG DC-8-61 aircraft base pack and 3D model .... and not the HJG DC-8-61F aircraft base pack and model.

Using that texture with the -61F base pack will result in "PRECISELY" what you're seeing per your attached image .... since mapping the forwatd fuselage mapping on all HJG DC-8-F model subjects follow a different texture BMP naming convention due to the port side forward fuselage maindeck cargo door on these subjects.

Mark C
AKL/NZ

[Dan K. Hansen]

I believe that jegs are talking about the AI model and hence I've moved this post

[jegs]

yes it is the AI model I am referring to. The other airline texture for that same AI model have the files I mentioned.

[jegs]

This is the link from which I downloaded the base model and texture simviation.com/hjg/aircraft/AI/hjgai_dc-8-61.htm The testure for the other airline has the files mentioned but not air jamaica.

[aerofoto - HJG Admin]

OOPS ....

I missed the "AI" detail in this


I'd focussed on the UI texture .... sorry about that

Distracted you see .... too many interruptions going on around me

Mark C
AKL/NZ

[tristar]

Jan 12, 2016 18:36:26 GMT aerofoto - HJG Admin said:

There's no missing texture files from any of the HJG DC-8 texture packages.

The only reason what you're seeing, per your attached image, is likly to occur is if you're using that AIR JAMAICA DC-8-61 texture with "the wrong" DC-8-61 aircraft base pack and 3D model.

Check that you're using this AJ texture with the standard HJG DC-8-61 aircraft base pack and 3D model .... and not the HJG DC-8-61F aircraft base pack and model.

Using that texture with the -61F base pack will result in "PRECISELY" what you're seeing per your attached image .... since mapping the forwatd fuselage mapping on all HJG DC-8-F model subjects follow a different texture BMP naming convention due to the port side forward fuselage maindeck cargo door on these subjects.

Mark C
AKL/NZ

Hi Jegs.

Mark is correct. You are using the DC-8-61F model with textures designed for the DC-8-61 pax model.
The AI model has the same texture naming convention as the UI model. F1 & F2 for the pax & F1F and F2F for the freighter.
This is why they are a no show.
The two textures that I have inadvertently left out of that pack are the night textures for the wings and engines etc.
You can take them from any other DC-8-61 texture pack as they are all identical.
I will add them to this pack and re-up them.

To recap. Use the DC-8-61 model and not the DC-8-61F model for the Air Jam textures.

Paul

[aerofoto - HJG Admin]

What Paul's essentially saying here folks is ....

The same texture/base pack/model protocols that apply to the HJG UI DC-8's also apply to HJG's AI DC-8 subject too .... in that textures for the PAX versions of these subjects must be used with the standard DC-8 base packs/models and textures for cargo version subjects must be used with the freighter DC-8 base pack/models only.

Be sure to correctly observe this protocol or texture display issues "WILL" result.

Thanks Paul ; )

Mark C
AKL/NZ

[jegs]

Hi All,

Thanks. I understand all the explanations given. All my other non AI Air Jamaica models and repaints are fine.

It is only the AI version at the link simviation.com/hjg/aircraft/AI/hjgai_dc-8-61.htm. that gives the problem.

I follow the instructions: AI Base model at top and repaints below.

The two base models folders when downloaded are are HJG_AI_HI Douglas_DC-8-61_v1.00 and HJG_AI_HI_Douglas_DC-8-61F_v1.00. I used HJG_AI_HI Douglas_DC-8-61_v1.00 with the repaint AI DC-8-61 Air Jamaica 1971 6Y-JGH.zip listed in the repaints section of the link. That is what yielded the result I showed.

Please try it. Maybe something is out of synch at this link.

[tristar]

Jan 17, 2016 16:05:38 GMT jegs said:

Hi All,

Thanks. I understand all the explanations given. All my other non AI Air Jamaica models and repaints are fine.

It is only the AI version at the link simviation.com/hjg/aircraft/AI/hjgai_dc-8-61.htm. that gives the problem.

I follow the instructions: AI Base model at top and repaints below.

The two base models folders when downloaded are are HJG_AI_HI Douglas_DC-8-61_v1.00 and HJG_AI_HI_Douglas_DC-8-61F_v1.00. I used HJG_AI_HI Douglas_DC-8-61_v1.00 with the repaint AI DC-8-61 Air Jamaica 1971 6Y-JGH.zip listed in the repaints section of the link. That is what yielded the result I showed.

Please try it. Maybe something is out of synch at this link.

Hi Jegs.

I downloaded the base pack and the textures and could reproduce what you have.
On checking the texture pack, I found I had uploaded the WIP and not the release folder.

Download the correct texture set from here:- app.box.com/s/tnqa5okboyzyliu2ai470gngdennpn1k

Once I have finished killing dragons (Skyrim), I'll update and upload the corrected file, but this should get you going.

Post here if it works or not.

Sorry for my error.

Paul

[jegs]

Bingo!!! All is well now. Thanks.

[aerofoto - HJG Admin]

"THANKS" for doing that Paul

And I hope the Dragon doesn't "GET'CHA"

Mark C
AKL/NZ